Slippery Tipper

Smale Farm Equipment announces the introduction of their new “Slippery Tipper” coating service for gypsum carriers and general tipper owners.

This service is to help tipper operators avoid high tipping angles and expensive tip overs that can occur if product will not unload easily, as well as reducing the need for manual clean out.

Smales apply a coating to the tipper interior to provide a Low Friction Coating that resists product sticking to the tipper floor and walls. This surface greatly assists with product removal.

The staff at Smales have developed a comprehensive process to ensure a quality product. The process involves preparation of the surface by sandblasting to ensure maximum adhesion. The sandblasted surface is then primed with a Two-Pack Primer. The surface is finished off with a final coating of Two-Pack Paint.

Smales can provide a quick turn around to ensure the owners truck is off the road for the minimum amount of time. Call 5398 1366 for further details.

Please Note: The Slippery Tipper coating is an AID to the process of unloading. It is not a Teflon coating. Performance will vary and is dependent upon a number of factors including weather conditions, product condition and the condition of the tipper and the amount of use. The performance can vary between owners depending on these factors. In all cases operators have reported that the process has helped the unloading process, however the degree of assistance can be variable.